TEST AND TAG ELIZABETH

Phone

We Service

Elizabeth & All of South Australia

Email

Test and Tag Elizabeth – The Local Guys – Guide to Test and Tagging Services!

If you are looking for the best test and tag Adelaide services, you are at the right place. The Local Guys have been in this industry for years and we have one of the finest test and tag Elizabeth teams that understand how important it is to keep your workplace safe.

We offer full visual and electrical testing and tagging for all your electrical devices and appliances in your workplace. Also, we offer microwave testing, fire blanket testing, and many other services.

Our services are available across Australia. Wherever you need our services, we will be there.

The Areas we services in Adelaide are:

Adelaide, Gawler, Elizabeth, Edwardstown, Modbury, Port Adelaide, Wingfield, Salisbury, Two Wells, Kidman Park, Salisbury Downs, Mawson Lakes, St Kilda SA, Virginia, Burton, Edinburgh, Parafield, Parafield Gardens, Pooraka, Bolivar, Norwood, Magill, Payneham, Burnside, Stepney, St Peters, Windsor Gardens, Hindmarsh, Findon, Grange, Henley Beach, Flinders Park, Woodville, West Lakes, Regency Park, Kilburn, Prospect, Seaton, Royal Park

Test and Tag Services we offer

Appliance Test and Tagging
Since we started our business, we have tested over 1 million appliances. We do our best to make sure that our clients’ workplaces are safe and appliance testing and tagging is the best way to make sure of that. Besides, regular testing is required under Australian Regulations.
We follow the following approach.

Visual Inspection: Our technicians make sure that your electrical items do not have any visual faults.
Electrical Testing: First, our technician will use a PAT to test your electrical items, which assesses many aspects of the item including lead polarity and earth continuity, to make sure that your devices are safe.
Comprehensive Reports: After finishing the tests, we tag your appliances with labels and write a comprehensive report about the entire process including items that passed or failed the tests.

Fire Extinguisher Testing
Testing fire safety equipment is necessary to make sure that they are accessible and effective when you need them. According to the Australian Standards AS 1851 – 2010 Maintenance of Fire Protection Systems and Equipment, the workplace must contain one or more fire extinguishers. Every six months, testing must be done to make sure that the fire extinguisher is functional.

At first, we perform a visual inspection to make sure of the complete accessibility, integrity, and safety of the extinguisher. We record the results and remind our clients that they need to re-check their fire extinguishers every 6 months.

Test and Tag Services We Offer

Fire Blanket Testing
Under Australian Standards AS 1851 – 2010 Maintenance of Fire Protection Systems and Equipment, fire blankets must be tested every 6 months.

To make sure that everything is right, we visually inspect the surrounding area and ensure the accessibility and integrity of the blanket. Our report includes where the blanket is, its condition, and any suggestions that need to be applied.

Safety Switch (RCD) Testing
Safety switches or Residual Current Devices (RCDs) prevent electrical shocks, which could be fatal. When there is a current increase, the switch trips. Therefore, they must be checked regularly to make sure they are working properly all the time.

Our technicians follow the Australian Standards AS/NZS 3760:2010 while testing safety switches. They perform these 2 tests:

Push-Button Test: This test makes sure that the switch trips properly when needed.
RCD Trip Test: This test makes sure that the safety switch trips in less than 40ms.

Our report includes the locations of RCDs, whether they passed or failed our tests, and any suggestions to take.

Smoke Detector Testing
Under Australian Standards AS 3786, testing smoke detectors should be done yearly to make sure that they are functional. 60% of deaths due to fires happen because smoke alarms do not work.

We will visually inspect your smoke detector and then do some tests including Push Button, Battery, and Decibel tests to make sure that the smoke alarm works properly.

We will record all the results and make sure to remind you when the next test is required.

If you are looking for the best test and tag Elizabeth company, The Local Guys are here for you. Contact us if you need more information.

Ensure the safety of your equipment with professional test and tag from The Local Guys. Call today!

REQUEST A QUOTE 13 11 05

Frequently Asked Questions

How much do you charge for test and tag in Elizabeth?

We charge on a sliding scale. So the more items you have the less the price is per item. But we service clients from 1 item all the way to 20,000+. So if you would like to get a quote contact us here.

Do you have a technician located in Elizabeth?

Yes! We have a technician located in the Northern Suburbs of Adelaide, so we can service any test and tagging requirements in Elizabeth, Salisbury, Munno Para, Gawler & anywhere else in Adelaide.

Will I get a report?

Will I get a Test and Tag Report?

Yes! All of our clients will receive a Full Report, that includes the item tested, the location of the item, whether it passed or failed, when it’s due next.

We also provide you with a certificate of compliance to show that you are compliant with Australian Standard AS/NZS 3760