When you should call professional for appliance testing and tagging?

When you should call professional for appliance testing and tagging?

The world today is filled with electrical equipment around us. There is no way one can neglect electricity in their day to day life. From a small shaver to now cars charging in your parking, electricity and the components that carry this electric current are everywhere. Switches, Fuses, circuit breakers, you name it, a home or building design circuit have all these components to make things work. What becomes important is that are these components safe. This is where testing and tagging comes into play. The basic objective of testing and tagging is to check whether the equipment is safe for personal use or not. The types of equipment are inspected first visually and then are checked for any damage, or any component missing in the system. There are some other online tests done on the system such as checking the earthing continuity, checking the insulation of the system and even the polarity.

Professional for Appliance Testing and Tagging

Electrical testing and tagging is not a child’s play and requires expert help to identify and detect the problems. Here are a few cases when you should be prompted to call the professionals for appliance testing and tagging.

1. Short Circuit:

One of the most common problems in the workplace environment or our homes are losing power due to a short circuit. A short circuit happens when two bare, non-insulated wires come in contact and blow up the fuse. At this movement of time, people mostly replace the fuse to restore power. In case you are not able to detect the area for this short circuit and the problem becomes redundant, it is the time that you head for the experts for testing and tagging.

Short Circuit

2. New Appliance or Circuit:

It is not always the case that once a circuit has been laid out and the appliances have been added to the load capacity that no more modifications will be done. In cases when a new circuit or line is added to the house, workplace or building, or some appliance is added to the existing circuit or the new one testing and tagging becomes mandatory. This testing is mostly visual and focuses upon mostly checking defects in the insulation or wiring. A very simple inspection is then followed by a tagging process and your new appliance or circuit testing and tagging is complete.

New Appliance or Circuit

3. Construction and demolition:

In case a building is under construction or demolition stages then it is highly recommended to get the testing and tagging of the circuit done every 3 months. Both construction and demolition involve activities that can damage the electrical circuit and chances of electrical leakage and current flow-out increase, making the place a risk zone for the employees on the site. Therefore, it is recommended to call the professionals and get the testing and tagging done.

Construction and demolition

4. Regular Testing:

Inspection testing and tagging are mandatory requirements for workplaces, countries like New Zealand and Australia have a separate standard for electrical testing and tagging. AS/NZS 3760 is the standard that is followed in the two countries and is designed specifically to reduce any hazard that can come into play due to electrical appliances. The standard mentions the specific practices that must be followed to abide by the regulation. Hiring a professional will serve to be a good idea for testing and tagging as per the regulatory norms.

Electrical Testing and Tagging

The very basic ideology of testing and tagging is to keep the people around safe and at the same time maintaining the records of the assessment that was done. Hiring a professional will help you investigate the root causes of where can a problem arises or what could have been the reasons for some past reasons. Hiring professionals for testing and tagging will also help you know what the market has in new to make your system more efficient.

Also, these professionals and their tools will make things easier for you to get the testing and tagging done for your electrical appliance.