Electrical Test and Tag Laceby Experts

test and tag melbourne

Test and Tag Laceby – Things Businesses Should Know About Electrical Compliance

As a business owner or manager in Melbourne, you must ensure your business is operating safely and in accordance with Australian regulations. If you have a business in Laceby, there are certain rules you need to observe especially when it comes to keeping your electrical appliances safe. For example, making sure your electrical appliances are functioning well is imposed for industries operating in a hostile environment. This can only be done through a test and tag service.

Whether you’re operating a café, restaurant, or consulting business, it is your priority to keep your clients and customers safe. By testing and tagging, you will know which appliances are no longer working well. It helps you obtain insightful data, which you can use to monitor workplace safety compliance and update it whenever it deems fit.

What can happen if you don’t maintain compliance?

  • Customers may feel unsafe and turned off from supporting your business.
  • Staff may feel they are less valued and look for other employment.
  • State regulators may fine and close down your business.
  • Insurance premiums can increase or will not provide coverage in the event of an accident or fire.
  • Businesses, owners, and managers can face hefty fines for non-compliance

10 Electrical Appliances That Should Undergo Test and Tag

Gone are the days when you needed to guess which appliances were working or not. The purpose of test and tag equipment is to test electrical equipment and derive an objective answer. The following is a list of appliances that need to be tested and tagged.

The Areas we services in Melbourne are:

Melbourne, Bendigo, Brunswick, Broadmeadows, Caulfield, Caulfield East, Cranbourne, Dandenong, Footscray, Geelong, Laceby, North Wangaratta, Melton, Tullamarine, Toorak, South Yarra, St Kilda, Wangaratta, Wangaratta South, Waldara, Craigieburn, Kalkallo, Epping, Somerton, Roxburgh Park, Mickleham, Tullamarine, Thornbury, Fitzroy, Richmond, Parkville, Reservoir, Benleigh East, Oakleigh, Bentleigh, Brighton, Carnegie, Mount Waverley, Cheltenham, Hughesdale, Kew, North Melbourne, Balaclava

Test and Tag Melbourne

Coffee Machines

A coffee machine can be dangerous if its wire happens to have peeled. Large coffee machines generally require 15amp to 20amp circuitry, so if the wire has peeled or the plug has been damaged, there is a higher chance whoever uses it will be electrocuted. A broken coffee machine can also be a fire hazard to your workplace.

Deep Fryers

If you have a café or restaurant, electric deep fryers must be tagged and tested as well. Moreover, you should have a wet chemical fire extinguisher, a fire blanket for backup, and other fire protective or emergency equipment.

Toasters, Pans, & Kettles

There is a long list of electrical equipment that needs to be tested and tagged depending on the type of business you’re operating. This includes anything that is electrically operated in your kitchens, such as your electric mugs, microwave oven, cell phone chargers, toasters, electric pans, kettles, and more.
The most important thing about testing is that it’s a way to find bugs early in development. If you wait until the end, it’s too late. This helps you find out which parts of your site are causing problems by showing you which appliances don’t pass the test. You can also use these tags to work out what changes need to be made to workplace safety and make sure your business is safe for everyone.
Test and Tag Melbourne

Trip Hazards, panel boards, & RCDs

We’ve already mentioned that electric appliances must be tested and tagged, so it’s important to look at the trip hazards in your office. This can include extensions laying across the walkways, circuit boards, panel boards, and extension wires. Testing and tagging fixed RCDs are also included in this category. The process is quite straightforward but a number of steps must be done right for safety. First, the RCD must be visually inspected and then tested electrically. If the item is fine then a colored tag will be placed.

An RCD is a small, cheap, and easy-to-use device that can be used by anyone. It is also very effective in testing your electrical system and identifying problems. RCD testing is a very important part of the process, which ensures that your system will work properly. In addition, it helps to eliminate any problems before they occur. It’s best to be proactive about this type of testing and ensure that it’s always done on time.

Flat Irons & Laundry Machines

The best way to minimize faulty appliances and leads in your business is to have your electrical appliances tested and tagged. This can include flat irons, laundry machines, and more. Under Melbourne regulations, you must hire a competent person who can carry out regular inspections and test electrical appliances used in the workplace.

Ensure the safety of your equipment with professional test and tag from The Local Guys. Call today!

Test and Tag Services We Offer

The Local Guys – Test and Tag is a one-stop-shop! We offer a range of Electrical & Fire Testing that you can protect your business in as many ways as possible, without the hassle of organizing arrangements with multiple companies.

What is included in your service? After we complete your testing, you will receive:

  • Full reporting
  • A certificate of compliance with your testing expiry date.
  • Any advice and information you require from a qualified technician.
  • We contact you when your next service is due – so you will never need to worry!

So what are you waiting for, REQUEST A QUOTE today!

Test and Tag Albany

Frequently Asked Questions

How often should test and tag be done?

When considering the test and tag intervals and how often any electrical appliance should be tested. The major underlying factor is the type of environment the appliance is generally located. In many workplaces will be having various frequencies of test and tag due to their individual risk management as well as WH&S planning. Depending on the state where you are operating. “Its safety regulations or the present Australian standard”. Will be specifying how often you require to get a test and tag done for your electrical appliances, safety switches, and so on.

Do you need to test and tag new equipment?

When any equipment is new, then the supplier must be held responsible for its electrical safety initially. “Any new equipment never requires to be tested on purchase.” But it must be inspected visually for any damage and must be tagged with the “New to Service” tag for indicating that they are purchased new. The tag will state that it is not tested in accordance with the Australian standard and the date should be specified when it will be tested by an experienced technician.

Does a test and tag certificate expire?

Students who complete a Test and Tag course successfully are considered to be a Competent Person according to the AS/NZS 3760 standard. A test and tag certificate will never expire but if you wish to retain the Competent Person status, you must possess the latest knowledge as well as skills.

What services do The Local Guys - Test and Tag Melbourne offer?

Test and Tag Melbourne – The Local Guys Services

At the Local Guys Test and Tag Melbourne, we check your workplace and electrical equipment to ensure that it is 100% safe and in compliance with WH&S requirements. We have franchises everywhere in Australia and our technicians are fully trained and fully qualified to take care of your workplace.

Here are our test and tag Melbourne services.

  1. Appliance Test and Tagging

Appliance Testing and Tagging guarantees the safety and longevity of electrical appliances and equipment. The Local Guys Test and Tag Melbourne technicians follow the following steps to carry out testing:

  • Visual Inspection: Our technicians ensure that your electrical items do not have any visual faults.
  • Electrical Testing: Electrical testing is done using a Portable Appliance Tester (PAT tester). This device assesses earth continuity, lead polarity, and insulation resistance to ensure the complete electrical safety of the appliance.
  • Reporting: Once the testing and tagging processes are complete, we record all the details in our report including whether the items passed or failed our tests.
  1. Fire Extinguisher Testing

Testing fire safety equipment is essential to make sure that they are accessible and effective in fire accidents.

Testing and tagging fire extinguishers must be done every 6 months to make sure that they are working well when needed in order to minimize the loss of lives, equipment, and property.

The process starts by performing a complete visual inspection to evaluate:

  • The accessibility.
  • Mounted height.
  • Mounting brackets.
  • Safety pins.
  • The security tie.
  • Pressure gauge readings.

After making sure that everything is working properly, we tag the fire extinguisher with a reference number, which indicates that the inspection process has been performed.

Besides, we keep a record of the assessment in our database to remind you every 6 months of the fire extinguisher testing.

  1. Fire Blanket Testing

Fire Blanket Testing must also be carried out every 6 months in accordance with Australian Standards AS 1851 – 2010 Maintenance of Fire Protection Systems and Equipment.

The process depends on visual inspection of the surrounding areas to make sure that the right signage is displayed properly. Besides, it is important to make sure that the blanket is accessible and that both the blanket and container are in optimal conditions.

The report of the fire blanket testing will include the location of the blanket, whether it passed or failed the testing, and any suggestions to increase safety.

  1. Safety Switch (RCD) Testing

Residual Current Devices (RCD), also known as Safety Switches, are extremely important in workplaces and homes since they reduce the risk of fatal electric shocks significantly.

Safety switches are extremely sensitive. Therefore, they trip when there is a minor current increase on the circuit. That is why they must be tested and tagged on a regular basis to make sure that they are working properly all the time.

Our technicians perform two tests in accordance with Australian Standards to make sure that your Safety Switches are working properly.

  • Push-Button Test: This test ensures that the safety switch is going to trip when necessary.
  • RCD Trip Test: This test depends on stimulating a surge in powder in order to assess the safety switch response. If it works properly, it should trip in less than 40ms.

After finishing the testing process, we provide the client with a full report including the location of the safety switch, whether it passed or failed the testing, and our recommendations to increase safety in the workplace.

The Local Guys Test and Tag Melbourne Team strives for excellence. We are leaders in the test and tag industry in Melbourne and the whole of Australia.

If you need more information, contact us. The Local Guys test and tag Melbourne team are here for you.

Read What Our Customers Have To Say

Protect your business with trusted and reliable electrical testing. Get your free quote today!

Our Services


Electrical Appliance Testing


Fire Extinguisher & Blanket Testing


Safety Switch (RCD) Testing


Smoke Detector Testing


Microwave Leakage Testing


Emergency Exit Light Testing

Request A Quote

Contact Us To Test And Tag Your Workplace

We Service

Wangaratta & All of Victoria