Every business and organization in Australia must get its electrical equipment tested and tagged to ensure workplace safety. The WH&S has also set some rules and regulations that bind the businesses and companies to ensure the safety of their workplace to keep their business, employees, and clients safe. When it comes to testing and tagging, it is crucial that you always choose the right experts to carry out the job for you so that you don’t end up risking your business and employee safety. The Local Guys – test and tag is your best bet in Australia that provides reliable services and affordable rates!
What is Test and Tag?
The Australian WH&S compliance entails every business to comply with the occupational health and safety standards that are put in place to ensure the safety of people at workplaces. As an employer, it is your duty of care to get all your appliances tested and tagged according to the guidelines defined by the government and WH&S in order to get your compliance certificate. Test and tag comprise of two steps:
Testing
The testing phase further involves two steps. Firstly, the equipment is visually inspected to find out any faults, damages, or defects that are visible to the eyes. Secondly, the equipment is tested electrically to find out if there are any issues with it internally when it comes to its circuitry and functioning or not.
Tagging
Once the testing is done comes the tagging phase. Each piece of equipment is given a tag, which includes all the results and conclusions of the test conducted on it. From its faults, if any, to the next test date to all the other info, the tag provides a detailed picture of the equipment’s health and performance.
However, if you are confused about whether you need to get your new equipment tested or not then, you must read on to find out.
New Equipment Testing and Tagging
When it comes to new electrical equipment in Australia, the supplier is responsible for the initial safety. First things first, any equipment that has been purchased newly doesn’t need to be tested. But, it is recommended to visually inspect it for ruling out the obvious damage and then tag it. In this case, the tag will be a bit different, though, and it will only state ‘New to Service.’ This tag means that the equipment has been electrically tested and needs to be tested at some point in the future.
The tag on the new equipment usually provide the following information:
- New to Service
- Entry date of Service
- Date when the test is due
- The appliance hasn’t been tested according to AS/NZS 3760:2022 so far
So, if you have bought new equipment for your business, it is always smart to get it tested and tagged beforehand to stay compliant. It will also aid you in remembering the actual date when you need to get it tested.
Bottom Line
Make sure that you are using the New to Service test tags on all your new equipment if you wish to stay compliant with the AS/NZS 3760:2022 standard. So, if you are a business that needs to comply with the workplace safety standards set by the WH&S, then you can connect with The Local Guys right away and get the ultimate peace of mind. Our services will bring your workplace the required safety so that you can focus on business development and enhance the productivity of your team. Get in touch with us today!
