We have comprehensively tested over 1 million appliances nationally since The Local Guys – Test & Tag began. Whether you have 2 staff members, or 200, it is absolutely imperative that you ensure your workplace is safe.
Appliance Testing & Tagging is the best way to guarantee longevity of your electrical appliances. Further, an electrical maintenance program is required from all businesses in Australia, under strict Australian Standards set out in AS/NZ 3760:2022.
How We Carry Out Testing
The testing of all fire safety equipment is crucial to ensure its accessibility and effectiveness in the event of a fire in your home or workplace.
Testing of Fire Extinguishers is carried out in accordance with Australian Standards AS 1851 – 2010 Maintenance of Fire Protection Systems and Equipment and must be completed every 6 months to ensure it is fully functional when needed to prevent the loss of property, equipment & lives.
During our test, we will perform a visual inspection to assess the accessibility, mounted height, mounting brackets, safety pins, labels, the security tie, and pressure gauge readings, before tagging the extinguisher with a reference number that shows the service or inspection performed. We will also make a record of our assessment in our software to refer back to every 6 months as tests occur.
Testing of Fire Blankets is carried out in accordance with Australian Standards AS 1851 – 2010 Maintenance of Fire Protection Systems and Equipment, and must be completed every 6 months.
During our test, we will perform a visual inspection of surrounding areas to ensure the correct signage is being displayed, the blanket is accessible and the blanket and container are in sufficient condition. We will then generate a full report of the each blanket tested, it’s location, whether it passed or failed, and any suggested actions to take.
Residual Current Devices (RCD), commonly known as Safety Switches, reduce the chance of a severe electric shock occurring. It is their job to trip if there is even a small current increase on their circuit, meaning they are extremely sensitive. Thus, they must be regularly tested to ensure they are functioning correctly at all times.
Our Safety Switch Testing is carried out in accordance with Australian Standards AS/NZS 3760:2022, and includes the following 2 tests:
We will then provide you with a comprehensive report, including the safety switch location, whether is successfully passed or failed, and any recommendations for action.
Microwave Leakage Testing is carried out in accordance with Australian Standard AS/NZS 60335.2.25, and must be completed every 12 months.
All microwaves leak radiation; however, the aim of the test is to determine just how much radiation is being leaked while it is in use. It is normal for microwaves to deteriorate over time, which subsequently increases the serious health risk to users. We test to ensure your microwave’s radiation is not exceeding the recommended limit through our comprehensive 3-step process:
Emergency Exit Light Testing is carried out in accordance with Australian Standard AS 2293.2, and must be completed every 6 months.
In the event of an emergency situation or power outage in your business, school, office or apartment complex, it is absolutely essential that the route to exit the premises is clearly advertised. Emergency exit lights work to provide some light for clearer vision to help people avoid obstacles, and navigate their way safely through the building when required.
Our test involves:
The responsibility falls on the business, school or workplace to ensure they have fully functioning emergency exit light to uphold their Work Health & Safety legal obligations, including ‘Duty of Care’.
Please fill in ALL the below information and one of our friendly staff will contact you within 2 business hours to discuss your testing.
Please fill in ALL the below information and one of our friendly staff will contact you within 2 business hours to discuss your testing.